Universal Hydro Systems Limited Header

Trimpro cutting / trimming machines

Trimpro Drypro 2630

Trimpro Drypro 2630

Trimpro Drypro 2630

The TRIMPRO DRYPRO was developed at the request of producers looking for yet another gentle, efficient, and high quality TRIMPRO product designed for those drying their flowers before trimming. With its adjustable-speed motor, leaves are trimmed by the stainless steel grates movement on each other. Its trimming capacity, up to 12 lbs/ph, makes it one with the best return on the market.

Its angled construction and latched front gate makes retrieval extremely simple, allowing perfectly trimmed flowers to exit the upper cylinder while the machine is still running.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine: 18″ x 18″ x 24″
  • Packaging: 20.5″ x 23.5″ x 27″
WEIGHT:
  • 48lbs (21.8 kg)
MATERIAL:
  • Grates & cylinder : Stainless steel (slot size 1/4″)
  • Body: Powder coated aluminium
  • Arms : Polyethylene FDA approved
  • Brushes : Nylon FDA approved
  • Tray : Polyethylene FDA approved HMWPE
  • Forward & Reverse switch
  • Timer

Trimpro Bucker 2690

Trimpro Bucker 2690

Trimpro Bucker 2690

The TRIMPRO BUCKER has been designed to facilitate the ‘bucking’ process being the removal of the flowers from the stem. Simple, fun and safe to use, the TRIMPRO BUCKER will cut your bucking time by at least 50% while being gentler on the flowers as it eliminates scissors and the handling there associated.

Feed the stem into one of the holes and the BUCKER rubber rollers will pull it through leaving the branch cleanly stripper. The flowers are caught and ready to be loaded into the TRIMPRO TRIMMER of your choice.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine with stand: 29″ x 29″ x 50″
  • Packaging machine only: 22″ x 18″ x 20″
  • Packaging stand only: 41″ x 31″ x 8″
WEIGHT:
  • Machine only: 89 Lbs
  • Machine with stand: 119 Lbs
MATERIAL:
  • Frame: Aluminum
  • Blade: Stainless steel
  • Rolls: Rubber
BLADE HOLES:
  • Small blade : Holes size 1/8 – 3/16 – 1/4 – 5/16 – 3/8
  • Large blade : Holes size 5/16 – 3/8 – 7/16 – 1/2 – 5/8 – 3/4

Trimpro Automatic 2680 XL

Trimpro Automatic 2680 XL

Trimpro Automatic 2680 XL

To respond to the needs of larger producers, the Trimpro Automatic XL has a capacity and productivity ratio 5 times greater than its baby brother, the Trimpro Automatic. The fluted design of the grate facilitates the plants movement. When combined with the dimmer on the motor regulating the whirlwind velocity plus the height adjustable six (6) blade assembly, the operator is always in full and precise control of the Automatic XL and the finished product.

For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Trimpro Automatic XL do the rest.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine: 991mm x 914mm x 1295mm Height
  • Packaging: 889mm x 889mm x 787mm Height
WEIGHT:
  • Machine only: 73kg
  • Machine and packaging: 87kg
MATERIAL:
  • Frame: Aluminium
  • Grate: Steel

Trimpro Automatic 2670

Trimpro Automatic 2670

Trimpro Automatic 2670

Let the Trimpro Automatic do the job for you. Equipped with a powerful three phase motor mated with a variable speed dimmer, height adjustable four (4) blades assembly and a circular hermetic structure that creates a whirlwind effect, the Trimpro Automatic is the fastest and safest way to trim your plants.

For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Trimpro Automatic do the rest.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine: 457mm x 622mm x 1041mm
  • Packaging: 559mm x 559mm x 610mm
WEIGHT:
  • Approximated Weight: 36kg
MATERIAL:
  • Frame: Aluminium
  • Grate: Steel

Trimpro Rotor XL 2610

Trimpro Rotor XL 2610

Trimpro Rotor XL 2610

The Trimpro Rotor XL is designed to set new standards—not only for faster, gentler, more efficient trimming of your high-value harvest, but for unbeatable value, too!

Now even the largest harvests gets our unique gentle touch, as the new Trimpro Rotor XL brings the quiet efficiency pioneered by our class-leading Rotor model to high-volume producers favoring the rack drying technique. The Rotor XL trimmer’s 6 rotating arms support 24 high-quality, stick- resistant leather fingers, designed to gently move flowers around the non-stick grate, allowing tempered steel blades below to trim leaves carefully and efficiently. Control is optimized with finger and blade speeds individually variable, and adjustable height control for both the finger support arms and cutting head. The clear, hinged, drum-cover further enhances control, increasing visibility to reduce the need for ‘second-pass’ processing. With secondary material falling securely into the workstation’s redesigned catch-bag system, touch-less extraction completes the process, with flowers exiting effortlessly through the unit’s gate, once unlatched.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine: 711mm Diameter x 1321mm
  • Machine Packaging: 864mm x 864mm x 737mm
  • Stand Packaging: 813mm x 813mm x 432mm
WEIGHT:
  • Mounted Machine: 66kg
  • Machine only and packaging: 61kg
  • Stand only and packaging: 16kg
MATERIAL:
  • Frame: Aluminum
  • Blades: Tempered Steel

Trimpro Rotor 2640

Trimpro Rotor 2640

Trimpro Rotor 2640

The new Trimpro Rotor has been designed and developed at the request of end users who are looking for yet another gentle and efficient Trimpro quality product. Employing leather fingers to circulate your flowers over our non-stick grate, the leaves are trimmed by our razor sharp tempered steel blades. Built at an angle, emptying the Rotor is as simple as swinging the latch to open the door and your perfectly trimmed flowers gently exit the upper cylinder, all while the machine is still running so production is non-stop. As with all our machines, the blade height is adjustable to meet every preference.

For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Rotor do the rest.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine: 406mm Diameter x 533mm
  • Packaging: 533mm x 533mm x 610mm
WEIGHT:
  • Machine only: 14kg
  • Machine and packaging: 19kg
MATERIAL:
  • Frame: Aluminum
  • Grate: Steel

Trimpro Rotor Workstation Table 2641

Trimpro Rotor Workstation Table 2641

Trimpro Rotor Workstation 2641

The Trimpro Rotor Workstation Table mounts under the Trimpro Rotor. A great combination which delivers awesome results.

Trimpro Original 2660

Trimpro Original 2660

Trimpro Original 2660

The Trimpro Original is an effective and very quiet leaf trimmer. It is used to remove excess leaves and twigs from different types of plants and flowers such as rosemary, oregano, basil, mint, lavender, coriander and parsley as well as in preparation for the extraction of essential oils and mixed flower clippings for pot pourri.

Its tempered steel blade makes a clean cut without damaging the plant. The Trimpro Original is equipped with a leaf recovery system and can be quickly disassembled for easy transportation.

For trimming, take a branch of a freshly harvested plant in your hand and move it over the grate with a back-and-forth motion while rotating the plant at the same time.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine: 462mm x 462mm x 691mm
  • Packaging: 533mm x 533mm x 305mm
WEIGHT:
  • Approximated Weight: 14kg
MATERIAL:
  • Frame & grate material: Aluminium

Trimpro Trimbox 2650

Trimpro Trimbox 2650

Trimpro Trimbox 2650

Built on the same principles as the Trimpro Original, the Trimbox is designed for smaller producers. Easily mounted on any workbench with brackets & clamps (included), the lightweight Trimbox is very efficient and provides impressive results.

For trimming, take a branch of a freshly harvested plant in your hand and move it over the grate with a back-and-forth motion while rotating the plant at the same time.

TECHNICAL DETAILS:

FORMAT:
  • Machine: 218mm (diameter) x 234mm
  • Packaging: 305mm x 229mm x 254mm
WEIGHT:
  • Approximated Weight: 6kg
MATERIAL:
  • Cylinder material: PVC
  • Grate material: Aluminium

Trimpro Trimbox Workstation 2651

Trimpro Trimbox Workstation 2651

Trimpro Trimbox Workstation 2651

The Trimpro Workstation has a stainless steel grate allowing for a slightly closer cut. When ordered separately, the Trimpro Trimbox Workstation 2651 easily mounts under the Workstation table. A great combination which delivers awesome results for the smaller user.

Trimpro Unplugged 2620

Trimpro Unplugged 2620

Trimpro Unplugged 2620

Our quietest trimmer ever, the new Trimpro Unplugged is a light, yet rugged ‘go-anywhere’ model designed for the home enthusiast and ideal for use in the apartment, greenhouse, or any situation where a need for noise discretion means power models just won’t do. It gently processes flowers with slim leather fingers encouraging leaves onto its grate and the razor-edged, stainless steel blades below. And speed, of course, is controlled by your very own hand.

The most advanced and efficient power-free trimming unit ever developed, no aspect of the Trimpro Unplugged has been overlooked in its design. The size, weight and shape, along with the reversible trimming action, all contribute to its ideal ergonomics. The leather fingers are treated with natural oils to reduce adhesiveness and maintain their suppleness. The stainless steel blades are of the highest possible quality, and of course, blade height is adjustable as with all Trimpro products.

TECHNICAL DETAILS:

FORMAT:
  • Mounted machine: 343mm Diameter x 305mm (406mm with handle installed)
  • Packaging: 356mm x 356mm x 330mm
WEIGHT:
  • Machine only: 3.5kg
  • Machine and packaging: 4kg
MATERIAL:
  • Frame: Aluminum
  • Grate: Steel
© Universal Hydro Systems Limited
 
Website by Si Gillott